8rdavcore 0.8.8 Dev8
8rdavcore 0.8.8 Dev8 description
8rdavcore is able to set voltages (VCore, Vdd, Vdimm, Vagp) and the FSB on different mainboards
8rdavcore is able to set voltages (VCore, Vdd, Vdimm, Vagp) and the FSB on different mainboards.
Setting the FSB, the Tras, Trcd, Trp memory-timings and the fan speed is also possible.
Tips:
- Run prime95 or something similar where you can see if a overclocked or undervoltaged processor produces errors.
- Use small steps to find a limit (VCore 0.05V, FSB 4Mhz)
- For my 8RDA+ this works: minimal FSB = (FSB at boot-time)-60, maximum FSB = (FSB at boot-time)+10
- 'Sensor' shows the measured voltages from the Winbond/ITE hardware monitor
- The CPU temp is from the socket (on 8RDA), not the internal diode
- Differences between theoretical and sensor values (+/- 0.05V) are normal
Currently supported mainboards: Abit NF7, Acorp NFU400N, Aopen AK79D-400VN, Asus A7N8X-EP, Chaintech CT-7NJ(S,L1), DFI Infinity NFII Ultra, DFI Lanparty NFII Ultra, Epox 8RDA+ Rev. 1.x, Epox 8RDA+ Rev. 2.x, Epox 8RDA(3,6,+,I,E), Gigabyte GA-7NNXP, Jetway N2PA, Leadtek K7NCR-18D, MSI K7N2 Delta, Shuttle AN35N Ultra V1.1, Shuttle SN45G, Soltek 75FRN(2)-L, Soltek NV400-L64.
What's New in This Release:
· Added log option
· Changed sensor main display
· Added chart
· Added Soltek NV400-L64
· Changed preset editor
· Fixed issue creating two AutoFSB entries with same name
· Added shutdown control
· Use multiplier calculation when > 12.5
· Added Winbond W83627THF sensor
· Added detection of I/O addresses for nVidia SMBUS
· Added Gigabyte GA-7NNXP
· Added Gigabyte GA-7N400 Pro
· Added temperatures to system tray
· Added Asus A7N8X v2.0 Deluxe
8rdavcore-0.8.8-dev8.zip