Asus WL-500g Premium e Optimus Huawei E220

zeze_digital

zeze_digital

GF Bronze
Membro Inactivo
Entrou
Jan 16, 2008
Mensagens
64
Gostos Recebidos
0
Boas colegas, tenho um colega ke tem esta router Asus WL-500g Premium V1, e já estamos fartos de tentar meter a mesma a rolar com os firmwares do koppel pra dar o modem Huawei E220 da Optimus e nada, segui as mesmas configs ke usei pra por a minha placa ZTE e tb o Huawei E220 da TMN e ambos rolaram 5*, agora com o meu colega nunca deu. Tentamos as versão de firmware do koppel: WL500gp-1.9.2.7-10-USB-1.69.trx ; WL500gp-1.9.2.7-8-USB-1.68a.trx e tb a versão 1.66 e nada. Pelo ke me quer parecer o erro é o seguinte o modem n é convertido de pen usb para modem, dai dar erro ao tentar ligar, pois n encontra o dispositivo como modem.

Dados do sistema:

Router: Asus WL-500g Premium V1 (com firm do koppel: WL500gp-1.9.2.7-10-USB-1.69.trx)
Modem: Huawei E220 (versão de software: PC CARD / modem USB 11.117.09.04.00)
PIN do card: desactivado
Serviço: Kanguru
Log da router:

Jan 1 00:00:03 syslogd started: BusyBox v1.1.3
Jan 1 00:00:03 kernel: PPP BSD Compression module registered
Jan 1 00:00:03 kernel: MPPE/MPPC encryption/compression module registered
Jan 1 00:00:03 kernel: Amd/Fujitsu Extended Query Table v1.3 at 0x0040
Jan 1 00:00:03 kernel: Flash Id: Vendor: 0x0001 Device: 0x007e
Jan 1 00:00:03 kernel: number of CFI chips: 1
Jan 1 00:00:03 kernel: Flash device: 0x800000 at 0x1c000000
Jan 1 00:00:03 kernel: Physically mapped flash: squashfs filesystem found at block 909
Jan 1 00:00:03 kernel: Creating 5 MTD partitions on "Physically mapped flash":
Jan 1 00:00:03 kernel: 0x00000000-0x00040000 : "boot"
Jan 1 00:00:03 kernel: 0x00040000-0x007f0000 : "linux"
Jan 1 00:00:03 kernel: 0x000e371c-0x007f0000 : "rootfs"
Jan 1 00:00:03 kernel: 0x007f0000-0x00800000 : "nvram"
Jan 1 00:00:03 kernel: 0x003e0000-0x007f0000 : "flashfs"
Jan 1 00:00:03 kernel: sflash: found no supported devices
Jan 1 00:00:03 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Jan 1 00:00:03 kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Jan 1 00:00:03 kernel: IP: routing cache hash table of 512 buckets, 4Kbytes
Jan 1 00:00:03 kernel: TCP: Hash tables configured (established 2048 bind 4096)
Jan 1 00:00:03 kernel: Linux IP multicast router 0.06 plus PIM-SM
Jan 1 00:00:03 kernel: ip_conntrack version 2.1 (256 buckets, 2048 max) - 352 bytes per conntrack
Jan 1 00:00:03 kernel: ip_conntrack_pptp version 1.9 loaded
Jan 1 00:00:03 kernel: ip_nat_pptp version 1.5 loaded
Jan 1 00:00:03 kernel: ip_tables: (C) 2000-2002 Netfilter core team
Jan 1 00:00:03 kernel: ipt_time loading
Jan 1 00:00:03 kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Jan 1 00:00:03 kernel: NET4: Ethernet Bridge 008 for NET4.0
Jan 1 00:00:03 kernel: 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
Jan 1 00:00:03 kernel: All bugs added by David S. Miller <davem@redhat.com>
Jan 1 00:00:03 kernel: FAT: bogus logical sector size 40704
Jan 1 00:00:03 kernel: FAT: bogus logical sector size 40704
Jan 1 00:00:03 kernel: NTFS: Unable to set blocksize 512.
Jan 1 00:00:03 kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan 1 00:00:03 kernel: Mounted devfs on /dev
Jan 1 00:00:03 kernel: Freeing unused kernel memory: 68k freed
Jan 1 00:00:03 kernel: Algorithmics/MIPS FPU Emulator v1.5
Jan 1 00:00:03 kernel: eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.108.9.0
Jan 1 00:00:03 kernel: PCI: Enabling device 01:02.0 (0004 -> 0006)
Jan 1 00:00:03 kernel: eth1: Broadcom BCM4318 802.11 Wireless Controller 4.108.9.0
Jan 1 00:00:03 kernel: mode
Jan 1 00:00:03 kernel: device vlan0 entered promiscuous mode
Jan 1 00:00:03 kernel: device eth1 entered promiscuous mode
Jan 1 00:00:03 kernel: br0: port 2(eth1) entering listening state
Jan 1 00:00:03 kernel: br0: port 1(vlan0) entering listening state
Jan 1 00:00:03 kernel: br0: port 2(eth1) entering learning state
Jan 1 00:00:03 kernel: br0: port 2(eth1) entering forwarding state
Jan 1 00:00:03 kernel: br0: topology change detected, propagating
Jan 1 00:00:03 kernel: br0: port 1(vlan0) entering learning state
Jan 1 00:00:03 kernel: br0: port 1(vlan0) entering forwarding state
Jan 1 00:00:03 kernel: br0: topology change detected, propagating
Jan 1 00:00:03 kernel: usb.c: registered new driver usbdevfs
Jan 1 00:00:03 kernel: usb.c: registered new driver hub
Jan 1 00:00:04 kernel: usb-uhci.c: $Revision: 1.275 $ time 14:22:14 Dec 30 2007
Jan 1 00:00:04 kernel: usb-uhci.c: High bandwidth mode enabled
Jan 1 00:00:04 kernel: PCI: Enabling device 01:03.0 (0000 -> 0001)
Jan 1 00:00:04 kernel: ECHI PCI device 30381106 found.
Jan 1 00:00:04 kernel: UCHI reg 0x41 = 10
Jan 1 00:00:04 kernel: UCHI reg 0x41 changed to = 0
Jan 1 00:00:04 kernel: usb-uhci.c: USB UHCI at I/O 0x100, IRQ 12
Jan 1 00:00:04 kernel: usb-uhci.c: Detected 2 ports
Jan 1 00:00:04 kernel: usb.c: new USB bus registered, assigned bus number 1
Jan 1 00:00:04 kernel: Product: USB UHCI Root Hub
Jan 1 00:00:04 kernel: SerialNumber: 100
Jan 1 00:00:04 kernel: hub.c: USB hub found
Jan 1 00:00:04 kernel: hub.c: 2 ports detected
Jan 1 00:00:04 kernel: PCI: Enabling device 01:03.1 (0000 -> 0001)
Jan 1 00:00:04 kernel: ECHI PCI device 30381106 found.
Jan 1 00:00:04 kernel: UCHI reg 0x41 = 10
Jan 1 00:00:04 kernel: UCHI reg 0x41 changed to = 0
Jan 1 00:00:04 kernel: usb-uhci.c: USB UHCI at I/O 0x120, IRQ 12
Jan 1 00:00:04 kernel: usb-uhci.c: Detected 2 ports
Jan 1 00:00:04 kernel: usb.c: new USB bus registered, assigned bus number 2
Jan 1 00:00:04 kernel: Product: USB UHCI Root Hub
Jan 1 00:00:04 kernel: SerialNumber: 120
Jan 1 00:00:04 kernel: hub.c: USB hub found
Jan 1 00:00:04 kernel: hub.c: 2 ports detected
Jan 1 00:00:04 kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Jan 1 00:00:04 kernel: PCI: Enabling device 01:03.2 (0000 -> 0002)
Jan 1 00:00:04 kernel: ehci_hcd 01:03.2: PCI device 1106:3104
Jan 1 00:00:04 kernel: ehci_hcd 01:03.2: irq 12, pci mem c0004000
Jan 1 00:00:04 kernel: usb.c: new USB bus registered, assigned bus number 3
Jan 1 00:00:04 kernel: ECHI PCI device 31041106 found.
Jan 1 00:00:04 kernel: ECHI reg 0x49 = 80010f20
Jan 1 00:00:04 kernel: ECHI reg 0x49 changed to = 80010f00
Jan 1 00:00:04 kernel: ECHI reg 0x4b = 80010f09
Jan 1 00:00:04 kernel: ECHI reg 0x4b changed to = 80010f29
Jan 1 00:00:04 kernel: PCI: 01:03.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW, correcting to 32
Jan 1 00:00:04 kernel: ehci_hcd 01:03.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
Jan 1 00:00:04 kernel: Manufacturer: Linux 2.4.20 ehci_hcd
Jan 1 00:00:04 kernel: Product: PCI device 1106:3104
Jan 1 00:00:04 kernel: SerialNumber: 01:03.2
Jan 1 00:00:04 kernel: hub.c: USB hub found
Jan 1 00:00:04 kernel: hub.c: 4 ports detected
Jan 1 00:00:05 kernel: hub.c: connect-debounce failed, port 1 disabled
Jan 1 00:00:06 kernel: hub.c: new USB device 01:03.0-1, assigned address 2
Jan 1 00:00:06 kernel: Manufacturer: HUAWEI Technologies
Jan 1 00:00:06 kernel: Product: HUAWEI Mobile
Jan 1 00:00:06 kernel: usb.c: USB device 2 (vend/prod 0x12d1/0x1003) is not claimed by any active driver.
Jan 1 00:00:06 kernel: Length = 18
Jan 1 00:00:06 kernel: DescriptorType = 01
Jan 1 00:00:06 kernel: USB version = 1.10
Jan 1 00:00:06 kernel: Vendor:product = 12d1:1003
Jan 1 00:00:06 kernel: MaxPacketSize0 = 64
Jan 1 00:00:06 kernel: NumConfigurations = 1
Jan 1 00:00:06 kernel: Device version = 0.00
Jan 1 00:00:06 kernel: Device Class:SubClass:protocol = 00:00:00
Jan 1 00:00:06 kernel: Per-interface classes
Jan 1 00:00:06 kernel: Configuration:
Jan 1 00:00:06 kernel: bLength = 9
Jan 1 00:00:06 kernel: bDescriptorType = 02
Jan 1 00:00:06 kernel: wTotalLength = 0020
Jan 1 00:00:06 kernel: bNumInterfaces = 01
Jan 1 00:00:06 kernel: bConfigurationValue = 01
Jan 1 00:00:06 kernel: iConfiguration = 00
Jan 1 00:00:06 kernel: bmAttributes = a0
Jan 1 00:00:06 kernel: MaxPower = 500mA
Jan 1 00:00:06 kernel:
Jan 1 00:00:06 kernel: Interface: 0
Jan 1 00:00:06 kernel: Alternate Setting: 0
Jan 1 00:00:06 kernel: bLength = 9
Jan 1 00:00:06 kernel: bDescriptorType = 04
Jan 1 00:00:06 kernel: bInterfaceNumber = 00
Jan 1 00:00:06 kernel: bAlternateSetting = 00
Jan 1 00:00:06 kernel: bNumEndpoints = 02
Jan 1 00:00:06 kernel: bInterface Class:SubClass:protocol = 08:06:50
Jan 1 00:00:06 kernel: iInterface = 00
Jan 1 00:00:06 kernel: Endpoint:
Jan 1 00:00:06 kernel: bLength = 7
Jan 1 00:00:06 kernel: bDescriptorType = 05
Jan 1 00:00:06 kernel: bEndpointAddress = 83 (in)
Jan 1 00:00:06 kernel: bmAttributes = 02 (Bulk)
Jan 1 00:00:06 kernel: wMaxPacketSize = 0040
Jan 1 00:00:06 kernel: bInterval = 00
Jan 1 00:00:06 kernel: Endpoint:
Jan 1 00:00:06 kernel: bLength = 7
Jan 1 00:00:06 kernel: bDescriptorType = 05
Jan 1 00:00:06 kernel: bEndpointAddress = 04 (out)
Jan 1 00:00:06 kernel: bmAttributes = 02 (Bulk)
Jan 1 00:00:06 kernel: wMaxPacketSize = 0040
Jan 1 00:00:06 kernel: bInterval = 00
Jan 1 00:00:06 kernel: usb.c: registered new driver usblp
Jan 1 00:00:06 kernel: printer.c: v0.13: USB Printer Device Class driver
Jan 1 00:00:08 kernel: Linux video capture interface: v1.00
Jan 1 00:00:08 kernel: SCSI subsystem driver Revision: 1.00
Jan 1 00:00:08 kernel: Initializing USB Mass Storage driver...
Jan 1 00:00:08 kernel: usb.c: registered new driver usb-storage
Jan 1 00:00:08 kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:08 kernel: Vendor: HUAWEI Model: Mass Storage Rev: 2.31
Jan 1 00:00:08 kernel: Type: CD-ROM ANSI SCSI revision: 02
Jan 1 00:00:08 kernel: USB Mass Storage support registered.
Jan 1 00:00:09 kernel: usb.c: registered new driver acm
Jan 1 00:00:09 kernel: acm.c: v0.22:USB Abstract Control Model driver for USB modems and ISDN adapters (GTRAN patched)
Jan 1 00:00:09 kernel: usb.c: registered new driver serial
Jan 1 00:00:09 kernel: usbserial.c: USB Serial support registered for Generic
Jan 1 00:00:09 kernel: usbserial.c: USB Serial Driver core v1.4
Jan 1 00:00:09 kernel: usbserial.c: USB Serial support registered for Modem
Jan 1 00:00:09 kernel: modem.c: GSM/CDMA modem driver v0.1
Jan 1 00:00:09 kernel: usbserial.c: USB Serial support registered for PL-2303
Jan 1 00:00:09 kernel: pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.10.1
Jan 1 00:00:10 kernel: usbserial.c: USB Serial support registered for FTDI SIO
Jan 1 00:00:10 kernel: usbserial.c: USB Serial support registered for FTDI 8U232AM Compatible
Jan 1 00:00:10 kernel: usbserial.c: USB Serial support registered for FTDI FT232BM Compatible
Jan 1 00:00:10 kernel: usbserial.c: USB Serial support registered for FTDI FT2232C Compatible
Jan 1 00:00:10 kernel: usbserial.c: USB Serial support registered for FTDI FT232R Compatible
Jan 1 00:00:10 kernel: usbserial.c: USB Serial support registered for USB-UIRT Infrared Tranceiver
Jan 1 00:00:10 kernel: usbserial.c: USB Serial support registered for Home-Electronics TIRA-1 IR Transceiver
Jan 1 00:00:10 kernel: ftdi_sio.c: v1.3.5r1:USB FTDI Serial Converters Driver
Jan 1 00:00:15 pppd[144]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'
Jan 1 00:00:46 pppd[172]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'
Jan 1 00:01:17 pppd[199]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'
Jan 1 00:01:47 pppd[226]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'
Jan 1 00:02:18 pppd[253]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'
Jan 1 00:02:48 pppd[280]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'
Jan 1 00:03:19 pppd[309]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'
Jan 1 00:03:49 pppd[336]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'
Jan 1 00:04:20 pppd[363]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'
Jan 1 00:04:51 pppd[390]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'
Jan 1 00:05:21 pppd[417]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'
Jan 1 00:05:52 pppd[444]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'
Jan 1 00:06:22 pppd[471]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'
Jan 1 00:06:53 pppd[498]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'
Jan 1 00:07:23 pppd[525]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'
Jan 1 00:07:54 pppd[552]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'
Jan 1 00:08:25 pppd[579]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'
Jan 1 00:08:55 pppd[606]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'
Jan 1 00:09:26 pppd[633]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'

Espero que alguem ke tenha tido o mesmo problema, ou que tenha uma instalação parecida optimus e220 com esta router me possa dar alguma dica pra ajudar o meu colega, pois já esgotamos as tentativas todas, obg.

Cumps, zeze.:espi28:
 
A

achiga

GF Bronze
Membro Inactivo
Entrou
Jan 22, 2008
Mensagens
22
Gostos Recebidos
0
Boas, tens aqui o manual do router,se não conseguires telefona para o apoio da kanguru que eles ajudan-te a configurar o mesmo.
Tenho um a funcionar a 100% e é uma máquina,não posso ajudar muito porque não fui eu quem o configurou,mas posso dizer que no manual está lá a tudo. Está a funcionar com o E220 da kanguru e o software é o original,para o wireless na configuração é gerado o código de acesso (password com dez números e letras)e esse é que é valido.
Tens que ir a HTTP://192.168.1.1 a pass: admin.
Espero ter ajudado.
 
zeze_digital

zeze_digital

GF Bronze
Membro Inactivo
Entrou
Jan 16, 2008
Mensagens
64
Gostos Recebidos
0
Infelizmente as tuas dikas n me ajudam, pois ha qq coisa nas configs da router, ou no firmware ke me está a falhar, qt ao apoio da kanguru, n sei se irá valer a pena, pois a mesma ñ foi comprada a eles de forma a ser mais barata. Mas agradeço-te a ajuda, e se fosse possivel consegues ver qual a versão de firmware da tua router, agradecia.

Cumps, zeze.
 
A

amnos

GF Bronze
Membro Inactivo
Entrou
Nov 26, 2010
Mensagens
3
Gostos Recebidos
0
dois anos depois do teu post os Modems são outros mas os problemas persistem.

No meu caso é um E1550. O resultado é o mesmo:
pppd[489]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'


Como conseguiste solucionar o problema em 2008?

Obrigado.
 
G

Goody

GF Prata
Entrou
Dez 29, 2006
Mensagens
138
Gostos Recebidos
0
amnos disse:
dois anos depois do teu post os Modems são outros mas os problemas persistem.

No meu caso é um E1550. O resultado é o mesmo:
pppd[489]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'


Como conseguiste solucionar o problema em 2008?

Obrigado.
Clique para expandir...

Boas
Foste buscar um problema muito antigo que nesta fase já deve estar + que resolvido.
Estás a usar internet kanguru ?
Eu à pouco tempo puz um asus 500gp a trabalhar com kanguru mas com o huawei e220.

Foi com o firmware 1.70 do kopel a 1.71 não deu.

Nas configurações puz:

AP: myconnection (kanguru móvel)
Dial *99#
vendor=0x12d1
product=0x1003

O E1550 não sei se aceita.
 
A

amnos

GF Bronze
Membro Inactivo
Entrou
Nov 26, 2010
Mensagens
3
Gostos Recebidos
0
Olá Goody, obrigado pela rapida resposta já que o assunto é ;) certamente antigo. Até nem tinha muita esperança que alguém me ouvisse no forum.

Vou tentar esclarecer qual dos problemas é:
- O HUAWEI E1550 que é o novo personagem da história.
- Talvez seja mesmo o FW 1.9.2.7-10-USB-1.71 que tenha algum bug.

---------------------------
________________________
Situação Actual:
WL 500gp
LaCie Hard Drive USB
Kanguru - HUAWEI E1550
FW 1.9.2.7-10-USB-1.71

USB Connection - Connection Mode --> GPRS/EDGE/UMTS
Zero CD Configuration --> User config at /usr/local/etc/usb_modeswitch.conf
________________________
USB_MODESWITCH.CONF actual e ##configs já experimentadas##

################################################## ######
# Huawei E1550
# Huawei E1750
#
# Contributor: Anders Blomdell, Ahmed Soliman

DefaultVendor= 0x12d1
DefaultProduct= 0x1446

TargetVendor= 0x12d1
TargetProduct= 0x1001

#DetachStorageOnly=1
#MessageEndpoint=0x01
#MessageContent="5553424312345678000000000000001106 0000000000000000000000000000"
#HuaweiMode=1

________________________
LOG ACTUAL

Jan 1 01:00:03 syslogd started: BusyBox v1.1.3
Jan 1 01:00:03 kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Jan 1 01:00:03 kernel: ttyS00 at 0xb8000300 (irq = 3) is a 16550A
Jan 1 01:00:03 kernel: ttyS01 at 0xb8000400 (irq = 3) is a 16550A
Jan 1 01:00:03 kernel: HDLC line discipline: version $Revision$, maxframe=4096
Jan 1 01:00:03 kernel: N_HDLC line discipline registered.
Jan 1 01:00:03 kernel: loop: loaded (max 8 devices)
Jan 1 01:00:03 kernel: PPP generic driver version 2.4.2
Jan 1 01:00:03 kernel: PPP Deflate Compression module registered
Jan 1 01:00:03 kernel: PPP BSD Compression module registered
Jan 1 01:00:03 kernel: MPPE/MPPC encryption/compression module registered
Jan 1 01:00:03 kernel: PPPoL2TP kernel driver, V0.13 (oleg@cs.msu.su)
Jan 1 01:00:03 kernel: Amd/Fujitsu Extended Query Table v1.3 at 0x0040
Jan 1 01:00:03 kernel: Flash Id: Vendor: 0x0001 Device: 0x007e
Jan 1 01:00:03 kernel: number of CFI chips: 1
Jan 1 01:00:03 kernel: Flash device: 0x800000 at 0x1c000000
Jan 1 01:00:03 kernel: Physically mapped flash: squashfs filesystem found at block 867
Jan 1 01:00:03 kernel: Creating 5 MTD partitions on "Physically mapped flash":
Jan 1 01:00:03 kernel: 0x00000000-0x00040000 : "boot"
Jan 1 01:00:03 kernel: 0x00040000-0x007f0000 : "linux"
Jan 1 01:00:03 kernel: 0x000d8f50-0x007f0000 : "rootfs"
Jan 1 01:00:04 kernel: 0x007f0000-0x00800000 : "nvram"
Jan 1 01:00:04 kernel: 0x003e0000-0x007f0000 : "flashfs"
Jan 1 01:00:04 kernel: sflash: found no supported devices
Jan 1 01:00:04 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Jan 1 01:00:04 kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Jan 1 01:00:04 kernel: IP: routing cache hash table of 512 buckets, 4Kbytes
Jan 1 01:00:04 kernel: TCP: Hash tables configured (established 2048 bind 4096)
Jan 1 01:00:04 kernel: Linux IP multicast router 0.06 plus PIM-SM
Jan 1 01:00:04 kernel: ip_conntrack version 2.1 (256 buckets, 2048 max) - 352 bytes per conntrack
Jan 1 01:00:04 kernel: ip_conntrack_pptp version 1.9 loaded
Jan 1 01:00:04 kernel: ip_nat_pptp version 1.5 loaded
Jan 1 01:00:04 kernel: ip_tables: (C) 2000-2002 Netfilter core team
Jan 1 01:00:04 kernel: ipt_time loading
Jan 1 01:00:04 kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Jan 1 01:00:04 kernel: NET4: Ethernet Bridge 008 for NET4.0
Jan 1 01:00:04 kernel: 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
Jan 1 01:00:04 kernel: All bugs added by David S. Miller <davem@redhat.com>
Jan 1 01:00:04 kernel: FAT: bogus logical sector size 58624
Jan 1 01:00:04 kernel: FAT: bogus logical sector size 58624
Jan 1 01:00:04 kernel: NTFS: Unable to set blocksize 512.
Jan 1 01:00:04 kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan 1 01:00:04 kernel: Mounted devfs on /dev
Jan 1 01:00:04 kernel: Freeing unused kernel memory: 68k freed
Jan 1 01:00:04 kernel: Executing /linuxrc
Jan 1 01:00:04 kernel: Algorithmics/MIPS FPU Emulator v1.5
Jan 1 01:00:04 kernel: eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.10.16
Jan 1 01:00:04 kernel: PCI: Enabling device 01:02.0 (0004 -> 0006)
Jan 1 01:00:04 kernel: 9
Jan 1 01:00:04 kernel: device eth0 entered promiscuous mode
Jan 1 01:00:04 kernel: device vlan0 entered promiscuous mode
Jan 1 01:00:04 kernel: device eth1 entered promiscuous mode
Jan 1 01:00:04 kernel: br0: port 2(eth1) entering listening state
Jan 1 01:00:04 kernel: br0: port 1(vlan0) entering listening state
Jan 1 01:00:04 kernel: br0: port 2(eth1) entering learning state
Jan 1 01:00:04 kernel: br0: port 2(eth1) entering forwarding state
Jan 1 01:00:04 kernel: br0: topology change detected, propagating
Jan 1 01:00:04 kernel: br0: port 1(vlan0) entering learning state
Jan 1 01:00:04 kernel: br0: port 1(vlan0) entering forwarding state
Jan 1 01:00:04 kernel: br0: topology change detected, propagating
Jan 1 01:00:04 dnsmasq[73]: DHCPREQUEST(br0) 192.168.1.10 00:1e:64:20:99:fa
Jan 1 01:00:04 dnsmasq[73]: DHCPACK(br0) 192.168.1.10 00:1e:64:20:99:fa Ricardo-PC
Jan 1 01:00:04 kernel: usb.c: registered new driver usbdevfs
Jan 1 01:00:04 kernel: usb.c: registered new driver hub
Jan 1 01:00:04 kernel: usb-uhci.c: $Revision: 1.275 $ time 11:09:31 Aug 7 2008
Jan 1 01:00:04 kernel: usb-uhci.c: High bandwidth mode enabled
Jan 1 01:00:04 kernel: PCI: Enabling device 01:03.0 (0000 -> 0001)
Jan 1 01:00:04 kernel: ECHI PCI device 30381106 found.
Jan 1 01:00:04 kernel: UCHI reg 0x41 = 10
Jan 1 01:00:04 kernel: UCHI reg 0x41 changed to = 0
Jan 1 01:00:04 kernel: usb-uhci.c: USB UHCI at I/O 0x100, IRQ 12
Jan 1 01:00:04 kernel: usb-uhci.c: Detected 2 ports
Jan 1 01:00:04 kernel: usb.c: new USB bus registered, assigned bus number 1
Jan 1 01:00:04 kernel: Product: USB UHCI Root Hub
Jan 1 01:00:04 kernel: SerialNumber: 100
Jan 1 01:00:04 kernel: hub.c: USB hub found
Jan 1 01:00:04 kernel: hub.c: 2 ports detected
Jan 1 01:00:04 kernel: PCI: Enabling device 01:03.1 (0000 -> 0001)
Jan 1 01:00:04 kernel: ECHI PCI device 30381106 found.
Jan 1 01:00:04 kernel: UCHI reg 0x41 = 10
Jan 1 01:00:04 kernel: UCHI reg 0x41 changed to = 0
Jan 1 01:00:04 kernel: usb-uhci.c: USB UHCI at I/O 0x120, IRQ 12
Jan 1 01:00:04 kernel: usb-uhci.c: Detected 2 ports
Jan 1 01:00:04 kernel: usb.c: new USB bus registered, assigned bus number 2
Jan 1 01:00:04 kernel: Product: USB UHCI Root Hub
Jan 1 01:00:04 kernel: SerialNumber: 120
Jan 1 01:00:04 kernel: hub.c: USB hub found
Jan 1 01:00:04 kernel: hub.c: 2 ports detected
Jan 1 01:00:04 kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Jan 1 01:00:04 kernel: PCI: Enabling device 01:03.2 (0000 -> 0002)
Jan 1 01:00:04 kernel: ehci_hcd 01:03.2: PCI device 1106:3104
Jan 1 01:00:04 kernel: ehci_hcd 01:03.2: irq 12, pci mem c0004000
Jan 1 01:00:04 kernel: usb.c: new USB bus registered, assigned bus number 3
Jan 1 01:00:04 kernel: ECHI PCI device 31041106 found.
Jan 1 01:00:04 kernel: ECHI reg 0x49 = 80010f20
Jan 1 01:00:04 kernel: ECHI reg 0x49 changed to = 80010f00
Jan 1 01:00:04 kernel: ECHI reg 0x4b = 80010f09
Jan 1 01:00:04 kernel: ECHI reg 0x4b changed to = 80010f29
Jan 1 01:00:04 kernel: PCI: 01:03.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW, correcting to 32
Jan 1 01:00:04 kernel: ehci_hcd 01:03.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
Jan 1 01:00:04 kernel: Manufacturer: Linux 2.4.20 ehci_hcd
Jan 1 01:00:04 kernel: Product: PCI device 1106:3104
Jan 1 01:00:04 kernel: SerialNumber: 01:03.2
Jan 1 01:00:04 kernel: hub.c: USB hub found
Jan 1 01:00:04 kernel: hub.c: 4 ports detected
Jan 1 01:00:04 dnsmasq[73]: DHCPREQUEST(br0) 192.168.1.157 00:22:fb:6e:f3:5e
Jan 1 01:00:04 dnsmasq[73]: DHCPACK(br0) 192.168.1.157 00:22:fb:6e:f3:5e
Jan 1 01:00:05 kernel: hub.c: connect-debounce failed, port 1 disabled
Jan 1 01:00:05 kernel: hub.c: new USB device 01:03.2-1, assigned address 2
Jan 1 01:00:05 kernel: Manufacturer: LaCie
Jan 1 01:00:05 kernel: Product: LaCie Hard Drive USB
Jan 1 01:00:05 kernel: SerialNumber: 10000E000C519352
Jan 1 01:00:05 kernel: usb.c: USB device 2 (vend/prod 0x59f/0x651) is not claimed by any active driver.
Jan 1 01:00:05 kernel: Length = 18
Jan 1 01:00:05 kernel: DescriptorType = 01
Jan 1 01:00:05 kernel: USB version = 2.00
Jan 1 01:00:05 kernel: Vendor:product = 059f:0651
Jan 1 01:00:05 kernel: MaxPacketSize0 = 64
Jan 1 01:00:05 kernel: NumConfigurations = 1
Jan 1 01:00:05 kernel: Device version = 0.00
Jan 1 01:00:05 kernel: Device Class:SubClass:protocol = 00:00:00
Jan 1 01:00:05 kernel: Per-interface classes
Jan 1 01:00:05 kernel: Configuration:
Jan 1 01:00:05 kernel: bLength = 9
Jan 1 01:00:05 kernel: bDescriptorType = 02
Jan 1 01:00:05 kernel: wTotalLength = 0020
Jan 1 01:00:05 kernel: bNumInterfaces = 01
Jan 1 01:00:05 kernel: bConfigurationValue = 01
Jan 1 01:00:05 kernel: iConfiguration = 00
Jan 1 01:00:05 kernel: bmAttributes = c0
Jan 1 01:00:05 kernel: MaxPower = 2mA
Jan 1 01:00:05 kernel:
Jan 1 01:00:05 kernel: Interface: 0
Jan 1 01:00:05 kernel: Alternate Setting: 0
Jan 1 01:00:05 kernel: bLength = 9
Jan 1 01:00:05 kernel: bDescriptorType = 04
Jan 1 01:00:05 kernel: bInterfaceNumber = 00
Jan 1 01:00:05 kernel: bAlternateSetting = 00
Jan 1 01:00:05 kernel: bNumEndpoints = 02
Jan 1 01:00:05 kernel: bInterface Class:SubClass:protocol = 08:06:50
Jan 1 01:00:05 kernel: iInterface = 00
Jan 1 01:00:05 kernel: Endpoint:
Jan 1 01:00:05 kernel: bLength = 7
Jan 1 01:00:05 kernel: bDescriptorType = 05
Jan 1 01:00:05 kernel: bEndpointAddress = 81 (in)
Jan 1 01:00:05 kernel: bmAttributes = 02 (Bulk)
Jan 1 01:00:05 kernel: wMaxPacketSize = 0200
Jan 1 01:00:05 kernel: bInterval = 00
Jan 1 01:00:05 kernel: Endpoint:
Jan 1 01:00:05 kernel: bLength = 7
Jan 1 01:00:05 kernel: bDescriptorType = 05
Jan 1 01:00:05 kernel: bEndpointAddress = 02 (out)
Jan 1 01:00:05 kernel: bmAttributes = 02 (Bulk)
Jan 1 01:00:05 kernel: wMaxPacketSize = 0200
Jan 1 01:00:05 kernel: bInterval = 00
Jan 1 01:00:06 kernel: hub.c: new USB device 01:03.2-2, assigned address 3
Jan 1 01:00:06 kernel: Manufacturer: HUAWEI Technology
Jan 1 01:00:06 kernel: Product: HUAWEI Mobile
Jan 1 01:00:06 kernel: usb.c: USB device 3 (vend/prod 0x12d1/0x1446) is not claimed by any active driver.
Jan 1 01:00:06 kernel: Length = 18
Jan 1 01:00:06 kernel: DescriptorType = 01
Jan 1 01:00:06 kernel: USB version = 2.00
Jan 1 01:00:06 kernel: Vendor:product = 12d1:1446
Jan 1 01:00:06 kernel: MaxPacketSize0 = 64
Jan 1 01:00:06 kernel: NumConfigurations = 1
Jan 1 01:00:06 kernel: Device version = 0.00
Jan 1 01:00:06 kernel: Device Class:SubClass:protocol = 00:00:00
Jan 1 01:00:06 kernel: Per-interface classes
Jan 1 01:00:06 kernel: Configuration:
Jan 1 01:00:06 kernel: bLength = 9
Jan 1 01:00:06 kernel: bDescriptorType = 02
Jan 1 01:00:06 kernel: wTotalLength = 0037
Jan 1 01:00:06 kernel: bNumInterfaces = 02
Jan 1 01:00:06 kernel: bConfigurationValue = 01
Jan 1 01:00:06 kernel: iConfiguration = 03
Jan 1 01:00:06 kernel: bmAttributes = e0
Jan 1 01:00:06 kernel: MaxPower = 500mA
Jan 1 01:00:06 kernel:
Jan 1 01:00:06 kernel: Interface: 0
Jan 1 01:00:06 kernel: Alternate Setting: 0
Jan 1 01:00:06 kernel: bLength = 9
Jan 1 01:00:06 kernel: bDescriptorType = 04
Jan 1 01:00:06 kernel: bInterfaceNumber = 00
Jan 1 01:00:06 kernel: bAlternateSetting = 00
Jan 1 01:00:06 kernel: bNumEndpoints = 02
Jan 1 01:00:06 kernel: bInterface Class:SubClass:protocol = 08:06:50
Jan 1 01:00:06 kernel: iInterface = 00
Jan 1 01:00:06 kernel: Endpoint:
Jan 1 01:00:06 kernel: bLength = 7
Jan 1 01:00:06 kernel: bDescriptorType = 05
Jan 1 01:00:06 kernel: bEndpointAddress = 81 (in)
Jan 1 01:00:06 kernel: bmAttributes = 02 (Bulk)
Jan 1 01:00:06 kernel: wMaxPacketSize = 0200
Jan 1 01:00:06 kernel: bInterval = 00
Jan 1 01:00:06 kernel: Endpoint:
Jan 1 01:00:06 kernel: bLength = 7
Jan 1 01:00:06 kernel: bDescriptorType = 05
Jan 1 01:00:06 kernel: bEndpointAddress = 01 (out)
Jan 1 01:00:06 kernel: bmAttributes = 02 (Bulk)
Jan 1 01:00:06 kernel: wMaxPacketSize = 0200
Jan 1 01:00:06 kernel: bInterval = 00
Jan 1 01:00:06 kernel:
Jan 1 01:00:06 kernel: Interface: 1
Jan 1 01:00:06 kernel: Alternate Setting: 0
Jan 1 01:00:06 kernel: bLength = 9
Jan 1 01:00:06 kernel: bDescriptorType = 04
Jan 1 01:00:06 kernel: bInterfaceNumber = 01
Jan 1 01:00:06 kernel: bAlternateSetting = 00
Jan 1 01:00:06 kernel: bNumEndpoints = 02
Jan 1 01:00:06 kernel: bInterface Class:SubClass:protocol = 08:06:50
Jan 1 01:00:06 kernel: iInterface = 00
Jan 1 01:00:06 kernel: Endpoint:
Jan 1 01:00:06 kernel: bLength = 7
Jan 1 01:00:06 kernel: bDescriptorType = 05
Jan 1 01:00:06 kernel: bEndpointAddress = 02 (out)
Jan 1 01:00:06 kernel: bmAttributes = 02 (Bulk)
Jan 1 01:00:06 kernel: wMaxPacketSize = 0200
Jan 1 01:00:06 kernel: bInterval = 00
Jan 1 01:00:06 kernel: Endpoint:
Jan 1 01:00:06 kernel: bLength = 7
Jan 1 01:00:06 kernel: bDescriptorType = 05
Jan 1 01:00:06 kernel: bEndpointAddress = 82 (in)
Jan 1 01:00:06 kernel: bmAttributes = 02 (Bulk)
Jan 1 01:00:06 kernel: wMaxPacketSize = 0200
Jan 1 01:00:06 kernel: bInterval = 00
Jan 1 01:00:06 dnsmasq[73]: DHCPINFORM(br0) 192.168.1.10 00:1e:64:20:99:fa
Jan 1 01:00:06 dnsmasq[73]: DHCPACK(br0) 192.168.1.10 00:1e:64:20:99:fa Ricardo-PC
Jan 1 01:00:06 kernel: usb.c: registered new driver usblp
Jan 1 01:00:06 kernel: printer.c: v0.13: USB Printer Device Class driver
Jan 1 01:00:08 kernel: Linux video capture interface: v1.00
Jan 1 01:00:08 kernel: SCSI subsystem driver Revision: 1.00
Jan 1 01:00:08 kernel: Initializing USB Mass Storage driver...
Jan 1 01:00:08 kernel: usb.c: registered new driver usb-storage
Jan 1 01:00:08 kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 01:00:08 kernel: Vendor: HDT72252 Model: 5DLAT80 Rev: V44O
Jan 1 01:00:08 kernel: Type: Direct-Access ANSI SCSI revision: 02
Jan 1 01:00:08 kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Jan 1 01:00:08 kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
Jan 1 01:00:08 kernel: Partition check:
Jan 1 01:00:08 kernel: p1 p2 p3
Jan 1 01:00:08 kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jan 1 01:00:08 kernel: Vendor: HUAWEI Model: Mass Storage Rev: 2.31
Jan 1 01:00:08 kernel: Type: CD-ROM ANSI SCSI revision: 02
Jan 1 01:00:08 kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Jan 1 01:00:08 kernel: Vendor: HUAWEI Model: MMC Storage Rev: 2.31
Jan 1 01:00:08 kernel: Type: Direct-Access ANSI SCSI revision: 02
Jan 1 01:00:08 kernel: Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 0
Jan 1 01:00:08 kernel: sdb : READ CAPACITY failed.
Jan 1 01:00:08 kernel: sdb : status = 1, message = 00, host = 0, driver = 08
Jan 1 01:00:08 kernel: Info fld=0x0, Current sd00:00: sns = f0 2
Jan 1 01:00:08 kernel: ASC=3a ASCQ= 0
Jan 1 01:00:08 kernel: Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00
Jan 1 01:00:08 kernel: sdb : block size assumed to be 512 bytes, disk size 1GB.
Jan 1 01:00:08 kernel: /dev/scsi/host2/bus0/target0/lun0: I/O error: dev 08:10, sector 0
Jan 1 01:00:08 kernel: I/O error: dev 08:10, sector 0
Jan 1 01:00:08 kernel: unable to read partition table
Jan 1 01:00:08 kernel: USB Mass Storage support registered.
Jan 1 01:00:09 kernel: usb.c: registered new driver acm
Jan 1 01:00:09 kernel: acm.c: v0.23:USB Abstract Control Model driver for USB modems and ISDN adapters (patched)
Jan 1 01:00:10 kernel: usb.c: registered new driver serial
Jan 1 01:00:10 kernel: usbserial.c: USB Serial support registered for Generic
Jan 1 01:00:10 kernel: usbserial.c: USB Serial Driver core v1.4
Jan 1 01:00:10 kernel: usbserial.c: USB Serial support registered for Modem
Jan 1 01:00:10 kernel: modem.c: GSM/CDMA modem driver v0.1
Jan 1 01:00:10 kernel: usbserial.c: USB Serial support registered for PL-2303
Jan 1 01:00:10 kernel: pl2303.c: Prolific PL2303 USB to serial adaptor driver
Jan 1 01:00:10 dropbear[128]: Running in background
Jan 1 01:00:10 kernel: usbserial.c: USB Serial support registered for FTDI SIO
Jan 1 01:00:10 kernel: usbserial.c: USB Serial support registered for FTDI 8U232AM Compatible
Jan 1 01:00:10 kernel: usbserial.c: USB Serial support registered for FTDI FT232BM Compatible
Jan 1 01:00:10 kernel: usbserial.c: USB Serial support registered for FTDI FT2232C Compatible
Jan 1 01:00:10 kernel: usbserial.c: USB Serial support registered for FTDI FT232R Compatible
Jan 1 01:00:10 kernel: usbserial.c: USB Serial support registered for USB-UIRT Infrared Tranceiver
Jan 1 01:00:10 kernel: usbserial.c: USB Serial support registered for Home-Electronics TIRA-1 IR Transceiver
Jan 1 01:00:10 kernel: ftdi_sio.c: v1.3.5r1:USB FTDI Serial Converters Driver
Jan 1 01:00:10 kernel: kjournald starting. Commit interval 5 seconds
Jan 1 01:00:10 kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 01:00:10 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
Jan 1 01:00:10 kernel: EXT3-fs: recovery complete.
Jan 1 01:00:10 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 01:00:11 kernel: kjournald starting. Commit interval 5 seconds
Jan 1 01:00:11 kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 01:00:11 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal
Jan 1 01:00:11 kernel: EXT3-fs: recovery complete.
Jan 1 01:00:11 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 01:00:11 kernel: Adding Swap: 524276k swap-space (priority -1)
Jan 1 01:00:17 pppd[167]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'
Jan 1 01:00:19 kernel: Device not ready. Make sure there is a disc in the drive.
Jan 1 01:00:19 kernel: sdb : READ CAPACITY failed.
Jan 1 01:00:19 kernel: sdb : status = 1, message = 00, host = 0, driver = 08
Jan 1 01:00:19 kernel: Info fld=0x0, Current sd00:00: sns = f0 2
Jan 1 01:00:19 kernel: ASC=3a ASCQ= 0
Jan 1 01:00:19 kernel: Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00
Jan 1 01:00:19 kernel: sdb : block size assumed to be 512 bytes, disk size 1GB.
Jan 1 01:00:19 kernel: /dev/scsi/host2/bus0/target0/lun0: I/O error: dev 08:10, sector 0
Jan 1 01:00:19 kernel: I/O error: dev 08:10, sector 0
Jan 1 01:00:19 kernel: Device not ready. Make sure there is a disc in the drive.
Jan 1 01:00:19 kernel: sdb : READ CAPACITY failed.
Jan 1 01:00:19 kernel: sdb : status = 1, message = 00, host = 0, driver = 08
Jan 1 01:00:19 kernel: Info fld=0x0, Current sd00:00: sns = f0 2
Jan 1 01:00:19 kernel: ASC=3a ASCQ= 0
Jan 1 01:00:19 kernel: Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00
Jan 1 01:00:19 kernel: sdb : block size assumed to be 512 bytes, disk size 1GB.
Jan 1 01:00:19 kernel: /dev/scsi/host2/bus0/target0/lun0: I/O error: dev 08:10, sector 0
Jan 1 01:00:19 kernel: I/O error: dev 08:10, sector 0
Jan 1 01:00:19 kernel: unable to read partition table
Jan 1 01:00:23 transmission-daemon[176]: Transmission 2.12 (11412) started (session.c:622)
Jan 1 01:00:23 transmission-daemon[176]: RPC Server Adding address to whitelist: *.*.*.* (rpc-server.c:789)
Jan 1 01:00:23 transmission-daemon[176]: RPC Server Serving RPC and Web requests on port 8081 (rpc-server.c:962)
Jan 1 01:00:23 transmission-daemon[176]: RPC Server Whitelist enabled (rpc-server.c:966)
Jan 1 01:00:23 transmission-daemon[176]: RPC Server Password required (rpc-server.c:969)
Jan 1 01:00:23 transmission-daemon[176]: Port Forwarding Stopped (port-forwarding.c:184)
Jan 1 01:00:23 transmission-daemon[176]: DHT Reusing old id (tr-dht.c:380)
Jan 1 01:00:23 transmission-daemon[176]: DHT Bootstrapping from 79 nodes (tr-dht.c:153)
Jan 1 01:00:23 transmission-daemon[176]: Using settings from "/mnt/torrent/.config" (daemon.c:483)
Jan 1 01:00:23 transmission-daemon[176]: Saved "/mnt/torrent/.config/settings.json" (bencode.c:1686)
Jan 1 01:00:23 transmission-daemon[176]: transmission-daemon requiring authentication (daemon.c:503)
Jan 1 01:00:23 transmission-daemon[176]: Loaded 22 torrents (session.c:1814)
Jan 1 01:00:48 pppd[217]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'

________________________
USB HDD info

Attached devices:

Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: HDT72252 Model: 5DLAT80 Rev: V44O
Type: Direct-Access ANSI SCSI revision: 02
Host scsi0: usb-storage
Vendor: LaCie
Product: LaCie Hard Drive USB
Serial Number: 10000E000C519352
Protocol: Transparent SCSI
Transport: Bulk
GUID: 059f065110000e000c519352
Attached: Yes
Port: 1
Bus: 01:03.2-1

Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: HUAWEI Model: Mass Storage Rev: 2.31
Type: CD-ROM ANSI SCSI revision: 02
Host scsi1: usb-storage
Vendor: HUAWEI Technology
Product: HUAWEI Mobile
Serial Number: None
Protocol: Transparent SCSI
Transport: Bulk
GUID: 12d114460000000000000000
Attached: No

Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: HUAWEI Model: MMC Storage Rev: 2.31
Type: Direct-Access ANSI SCSI revision: 02
Host scsi2: usb-storage
Vendor: HUAWEI Technology
Product: HUAWEI Mobile
Serial Number: None
Protocol: Transparent SCSI
Transport: Bulk
GUID: 12d114460000000000000000
Attached: Yes
Port: 2
Bus: 01:03.2-2

-------------------------

PLANO:
- Procurar a versão 1.70 do FW
- Aguardar noticias/hints vossas

-------------------------
LINKS SEGUIDOS
GPRS/3G/HSDPA/UMTS USB modem Huawei E220 on Asus router - HowTo
Draiberghof
Asus WL500g.Premium and Huawei e1750
 
A

amnos

GF Bronze
Membro Inactivo
Entrou
Nov 26, 2010
Mensagens
3
Gostos Recebidos
0
Suponho que ainda não tenhas lido o post anterior.

BOAS NOTICIAS... a tua dica funcionou
- instalei o FW 1.9.2.7-10-USB-1.70a

- Alterei o usb_modeswitch.conf pelo que consegui entender neste forum

ficou assim:
DefaultVendor= 0x12d1
DefaultProduct= 0x1446

TargetVendor= 0x12d1
TargetProduct= 0x1001

MessageEndpoint=0x01

MessageContent="55534243000000000000000000000011060000000000000000000000000000"

- USB Connection
Connection Mode -> GPRS/EDGE/UMTS

- GPRS
Username:
Password:
APN:
Dial Number (usually *99***1#): *99#
USB device serial speed (usually 115200): 115200
USB device location ID:

Custom USB device parameters
USB device Vendor ID (0xabcd): 0x12d1
USB device Product ID (0xefgh): 0x1001
USB device packet size (0 for default): 2048

Zero CD Configuration
Modem type: user config at /usr/local/etc/usb_modeswitch.conf

e resultado...
USB devfs Devices

Device : Location : Info
/dev/usb/tts/0 : 2.0 : Manufacturer="HUAWEI Technology" : Product="HUAWEI Mobile"
/dev/usb/tts/1 : 2.1 : Manufacturer="HUAWEI Technology" : Product="HUAWEI Mobile"
/dev/usb/tts/2 : 2.2 : Manufacturer="HUAWEI Technology" : Product="HUAWEI Mobile"

:6_15_221::espi28:
__________________

Obrigado por tudo, espero que este post sirva de ajuda para mais alguém.

Router - Asus WL500gp
FW - 1.9.2.7-10-USB-1.70a
Modem USB - HUAWEI E1550 (kanguru)
 
Deves fazer login ou registrar-te para postar aqui.
Topo