Fonsec@
In Memoriam
- Entrou
- Set 22, 2006
- Mensagens
- 29,306
- Gostos Recebidos
- 6
OpenATV-4.0-beta-dm800 #ssl84d dailybuild
OpenATV-4.0-dm800 SSL #84d by gjstroom
This image is a 100% build from OpenATV source code, it uses all orignal 20130607 drivers which can run all plugins without patching.
I added the secret-feed (softcams) and changed the default language to US. It's a 100% clean image !
Please note: The image is still under development, so don't expect everything to work.
Problems might occur with wifi and all kinds of dvb-t usb sticks.
Features:
source: 20140308
drivers: 20130607
bootloader: ssl84d
size:51.1 mb
skin: MetrixHD
Image flashing:
Be sure you have SSL84 on your box, if you get the "INVALID IMAGE (OR OLD VERSION)" error, flash SSL84 first and try again.
If your box is already at SSL84x you can flash the image immediately, the new SSL84d is included in the image !
Internet Explorer (recommended)
SUNRAY-FlashUP
Powercycle after flashing
OpenATV-4.0-beta-dm800 #ssl84d
[SIZE=+2]<-Download->[/SIZE]
Please note: all pictures are taken from a dm800se.
Note1: You can get a MetrixWeather ID for your location here: OpenStore - MetrixWeather
Just edit the line 'config.plugins.MetrixWeather.woeid=640161' and remove all other config.plugins.MetrixWeather.x lines in your /etc/enigma2/settings file.
Before you start editing give a init 4 (enigma2 stops), edit above file and give a init 3 (enigma2 starts).
Note2: OpenATV uses a different remote keymap, you can change the mappings using: Menu - Setup - System - Button setup
Note3: Online update and Plugin install will give some 'has no valid architecture, ignoring' warnings. This is not an image fault, it's the OpenATV feed which contains modules not suitable for the dm800hd.
Note4: Softcams are installable via 'blue button' - softcam - download softcams
Note5: The default location for CCcam.cfg is in /usr/keys/CCcam.cfg !
Note6: At the moment dropbear (ssh access) does not work !
This fixes it:
OpenATV-4.0-dm800 SSL #84d by gjstroom
This image is a 100% build from OpenATV source code, it uses all orignal 20130607 drivers which can run all plugins without patching.
I added the secret-feed (softcams) and changed the default language to US. It's a 100% clean image !
Please note: The image is still under development, so don't expect everything to work.
Problems might occur with wifi and all kinds of dvb-t usb sticks.
Features:
source: 20140308
drivers: 20130607
bootloader: ssl84d
size:51.1 mb
skin: MetrixHD
Image flashing:
Be sure you have SSL84 on your box, if you get the "INVALID IMAGE (OR OLD VERSION)" error, flash SSL84 first and try again.
If your box is already at SSL84x you can flash the image immediately, the new SSL84d is included in the image !
Internet Explorer (recommended)
SUNRAY-FlashUP
Powercycle after flashing
OpenATV-4.0-beta-dm800 #ssl84d
[SIZE=+2]<-Download->[/SIZE]
Please note: all pictures are taken from a dm800se.
Note1: You can get a MetrixWeather ID for your location here: OpenStore - MetrixWeather
Just edit the line 'config.plugins.MetrixWeather.woeid=640161' and remove all other config.plugins.MetrixWeather.x lines in your /etc/enigma2/settings file.
Before you start editing give a init 4 (enigma2 stops), edit above file and give a init 3 (enigma2 starts).
Note2: OpenATV uses a different remote keymap, you can change the mappings using: Menu - Setup - System - Button setup
Note3: Online update and Plugin install will give some 'has no valid architecture, ignoring' warnings. This is not an image fault, it's the OpenATV feed which contains modules not suitable for the dm800hd.
Note4: Softcams are installable via 'blue button' - softcam - download softcams
Note5: The default location for CCcam.cfg is in /usr/keys/CCcam.cfg !
Note6: At the moment dropbear (ssh access) does not work !
This fixes it: