Aqui vai.
Desde já deixo aqui a info que todo este material foi encontrado noutros fóruns e nenhum é da minha autoria. Apenas estou a partilhar aqui, para ajudar outros que estejam com problemas com equipamentos antigos. Mantenho os mesmos links, porque nada disto foi criado por mim.
Aqui o NavCore 9.541
SE by
Tonyzeta (a manter os créditos) que tem um ficheiro swap com 16mb (o primeiro arranque do equipamento vai demorar, mas depois a velocidade de arranque vai ser normal e o equipamento fica com uns 8 a 10mb de ram disponíveis):
https://safelinking.net/77xMlX1
Para os seguintes equipamentos:
ONE XL
ONE 30 Series (UK/AU) / ONE 125/130 (US)
XL 30 Series (UK/AU) / XL 325 / 330 (US)
ONE 2nd Edition
ONE 3rd Edition
Start 1GB
Se o GPS ficar com o problema do relógio (pesquisar por WNRO para mais info) instalar um dos 2 ficheiros para tentar resolver a situação.
TTconv V11 (instruções de instalação no ZIP):
http://www.rima-lock.com/ttconv-v11.zip
glgps:
http://www.rima-lock.com/glgps.rar
Configuração do ficheiro setconfig.txt (para o NAvCore
SE) que se encontra na pasta Config na raiz do equipamento.
As seguintes opções são possíveis para o ficheiro setconfig.txt (copiado de outro forum postado por um user chamado
P33dro):
model:x40light
Run in Save RAM Mode
runclean
viewmsg
sdid:1
runcheck
changedtext:You can type whatever you like
delgns
delmap
ttsoff
btoff
bton
fmon
fmoff
rm
nomsg
usesetting
cleanflash
noqfixdel
Please note: only use one switch for a function!!! E.g.: bton or btoff -never both as in the unmodified setconfig.txt
Descrição de cada uma das opções:
model: you can use ori, xls, x20, x30, x40, x40light (TTS working on ONE3rd), x40light2, x40light3, start, start2, ttssdk -ori is for your original device and the x40light switches for the devices without BT or FM
runclean deletes not nedded files like the sirf data for gl devices and vice versa
viewmsg displays boothelpmessages (run insave ram mode, x30 emu etc.)
sdid:1 only needed if you use different Navcores on several SD cards to make sure you keep your settings you need a "SDid.txt" with a corresponding number on each SD card
runcheck checks once some data and writes the result into "config.txt"
changedtext:You can type whatever you like
delgns deletes TMC-data - only useful if you really use TMC
delmap deletes "currentmap.dat" so that you can choose a map each time you start
ttsoff to deactivate TTS on devices without TTS function because the standard is "on"
btoff deactivates Bluetooth
bton to activate menufunctions like "Safety cams" - won't activate BT on device without the hardware!!
fmon necessary on some x10 devices and to enable the MP3 player(Jukebox) functions on some devices
fmoff turns the FM transmitter off
rm to delete some more files that are not needed in the current emulation
nomsg disables boot messages completely
usesetting same as sdid
cleanflash deletes the flash and therefore all settings are lost
noqfixdel only for devices with GL chip : on reset the quickfix data will be deleted ,and this setting prevents it - useless for SIRF chips
Aqui fica o setconfig.txt que tenho num TomTom Start com 1GB:
model:start2
Run in Save RAM Mode
rm
TTSoff
btoff
fmoff
delmap
arm
Espero estar a ajudar alguém.
Abraços.